Page 565 - Cornwell Product Catalog
P. 565

Steel Line Stopper Kit
Four piece kit used to seal steel
lines once disconnected. Prevents
fluid leaks and contamination
during service. Use with all automotive fluids. Suitable for: fuel rails and lines, flare type steel brake, fuel and A/C lines, Banjo fittings on brake, power steering and transmission cooler lines. Installs in seconds.
Master Line Stopper Kit
Includes four stoppers to seal lines in
automotive flare type steel brake lines, power
steering and transmission cooler lines. Two
line clamp pliers, 6-1/4” and 7-1/4” in length, LS17530 seal flexible brake lines, fuel and vacuum
lines with smooth rounded edges
that will not damage internal hose
reinforcement. Made of lightweight
and highly visible, fluid resistant nylon reinforced
plastic. Eight stoppers and four caps are made of highly visible,
flexible plastic and used for plugging vacuum and fuel lines. Stepped LS17740 design can be used for both internal and external stoppage. Stopper sizes
from 1/8” through 1/2”. Caps are 5/8” and 3/4” for larger lines.
LS17510 LS17520
LS17750 LS34400 LS34490
DESCRIPTION LS34500 1/8” Line Stopper
Extender #1
Extender #2
Extender #3
Extender #4
Extender #5 (must be used with LS17530) O Ring #1
O Ring #2
O Ring #3
O Ring #4
O Ring #5 Pipe Stretcher Large O Ring Small O Ring
Tailpipe Expander
Stretches all pipe including stainless steel. Use with an impact wrench to quickly stretch pipes. Collet sets expand pipes from
1-5/8” to 4-1/4”. The tool can be used
on the vehicle. The pipe stretcher is a convenient, inexpensive alternative
to hydraulic pipe expanders. The kit
comes in a molded case for storage.
           LS17540 LS17550 LS17710 LS17720 LS17730
LS67030 LS67040 LS67050 LS67060 LS67070 LS67080 LS67090 LS67100 LS67110 LS67120 LS67130 LS67140
3/16” - 1/4” Line Stopper 5/16” - 3/8” Line Stopper 7/16” - 1/2” Line Stopper
5/8” Line Stopper Cap
3/4” Line Stopper Cap 6-1/4” Brake and Fuel Line Clamp 7-1/4” Brake and Fuel Line Clamp 1/4” Steel Line Stopper
5/16” Steel Line Stopper 3/8” Banjo Steel Line Stopper 3/8” Steel Line Stopper
Nut Splitter
                                Exhaust and Tailpipe Cutter
19mm cutters to eliminate “Bottoming
Out”. Cuts thin and thick walled pipe
from 3/4” to 3-1/4” in diameter (19mm
to 83mm). Gets into tight spots for
easy cutting. Cutting wheels on every pivot for smooth tracking.
Exhaust Remover Pliers
Separates exhaust hanger brackets
from rubber supports. Works on all
import and domestic car and truck
exhaust systems that use the rubber hanger supports. Simply squeeze the plier handles to force the bracket from the rubber support.
Forged and heat-treated frame with
offset handle works where ordinary
nut splitters may fail. Smooth action
cracks nuts without damaging bolt threads. Chisel rotates to line up parallel to bolt. Splits non-heat-treated nuts of 7/16” (11mm) through 3/4” (19mm) diameter. Overall Length: 6-3/4”
Exhaust Back Pressure Tester
Quickly test back pressure and
clogged or obstructed catalytic
converters. Three stage adapter
has 12mm and 18mm thread sizes
to fit most domestic and import
vehicle’s oxygen sensor ports. The
standard 1/4”-20 tip provides the
ability to test through the exhaust
pipe when O2 sensor ports are
inaccessible. (pipe tap set not
included.) High temperature silicone hose prevents damage to tester from high exhaust temperatures. Kit includes: 0-15 PSI gauge, 6” high temperature silicone tube, 3-stage adapter, flange adapter, and blow- molded carrying case
   Use each tool properly. See page 688 for safety warnings. 563

   563   564   565   566   567