Page 541 - Cornwell Product Catalog

PULLERS/SEPARATORS
HRC49700
14 Piece Slide Hammer and Puller Set
Designed to remove
stubborn bushings,
seals, sleeves,
bearings or pressed-
in bolts. All full set
of accessories make
the slide hammer and puller set ideal for pulling dents in auto bodies. Set includes 2.5 lb. slide hammer, handle crossbar, jaw adapter, two-jaw puller, set of 2 small jaws, set of 2 large jaws, screw adapter, slide screw, square hook, puller hook, cone rod and 2 piece locking pins.
OW7507
Universal Inner CV Joint Puller
Use with OTC slide hammer OW1155, extension OW7508, or both.
SLC11880 Heavy-Duty Pitman Arm Removal Tool
Work safer and more
efficiently while saving
time using the Pitman
Arm Remover for removing large Pitman Arms on 3/4 to 1 ton pickup trucks. This tool design is forged construction so that it is secured and locked in place while being utilized. This forged design allows
for less torque and space, often eliminating the need to remove the steering box. Made of components made to last and resist corrosion better than conventional Pitman pullers that become faulty over time. Applications: Chevy/GMC 2500/3500, Ford 250/350, Dodge 2500/3500.
SLC18200
46mm Pitman Arm Torque Adapter
The updated design of today’s modern
full-size trucks require specialty tools
rated for heavy-duty equipment. Such
is the case with servicing and replacing
the pitman arm on 2010 and later Ford,
GM, Dodge and other full-size pickup
trucks. This Pitman Arm Torque Adapter allows technicians to loosen and tighten the large sector shaft nut without having to remove various sub components such as the track arm, track arm bracket and related suspension pieces which can be very time consuming. This tool also includes a special design feature that enables it to clear the steering box housing and other obstacles. It’s designed to work on both the factory pitman arm and aftermarket drop-style pitman arms that are installed on trucks with lift kits. The insert card includes proper torque specs for the added length of the Torque Adapter.
SLC68800
GM Pitman Arm Pulle
Work safer and more efficiently removing large pitman arms
on 1/2 to 3/4 ton pickup
trucks. This tool design is forged construction so that
it is secured and locked in place while being utilized. This forged design allows for less torque and space, often eliminating the need to remove the steering box. Made to last and resist corrosion better than conventional pitman pullers that become faulty over time. Applications: GM trucks and SUVs from 1988 and later, and most C & K chassis vehicles with a steering gearbox / pitman arm.
Includes:
QTY. PART #
1 HR49701
1 HR49702
1 HR49703
1 HR49704
1 HR49705
1 HR49706
1 HR49707
1 HR49708
1 HR49709
2 HR49710
2 HR49711
1 HR49712
1 HR47913
OWC3010
Pitman Arm Trio Set
DESCRIPTION
2 Pound Slide Hammer Threaded Slide Rod Screw Adapter Square Hook
Jaw Adapter
2 Jaw Puller Puller Hook Locking Pliers Cone Rod Small Jaws Large Jaws T-Handle Crossbar Blow Molded Case
Three Pitman Arm pullers to
remove most automotive and
light truck Pitman Arms used
on today’s vehicles. OW6496
removes all Pitman arms but
is specifically designed for
low-clearance areas found on
light trucks and SUVs. Heavy-
duty conical style pullers will not
spread. Two sizes included for
compact and full size cars and light trucks.
Includes:
PART #
OW6496 OW8149 OW8150
DESCRIPTION
Pitman Arm Puller
Small Conical Pitman Arm Puller Large Conical Pitman Arm Puller
r
Use each tool properly. See page 688 for safety warnings.
www.cornwelltools.com 539
UNDERCARRIAGE & WHEEL