Page 537 - Cornwell Product Catalog
P. 537

PULLERS/SEPARATORS
  HR187
Steering Wheel
Puller
Designed to pull steering
wheels on all major
makes of automobiles.
The 5/8” x 4” center screw is equipped with a floating swivel, recessed to prevent damage to horn wire connections. Zinc Plated.
OWC7793
Master Bolt Puller Set
Multi-purpose applications
such as steering wheels,
flywheels, harmonic
balancers, pulleys and
gears with tapped holes.
Includes special stepped
bolts for 1990-2005 GM
3300-3800 V6 crankshaft
pulleys. Includes: 4-way
slotted puller yoke, two
lengths of hardened “live-center” forcing screws, a set of three interchangeable forcing screw tips (to optimize pressure and prevent “walking”), blow-molded case. Each bolt size is molded into the storage compartment, three each of the following bolt sizes: M8 x 1.25 x 90mm, M8 x 1.25 x 45mm, 1/4-28 UNF x 3”, M8 x 1.25 x 65mm, 5/16-24 UNF x 3”, 5/16-18 UNC x 3.5”, 3/8-24 UNF x 1.5”, 3/8-16 UNC x 2”, 3/8-16 UNC x 3”, 3/8-16 UNC x 4.5”, M10 x 1.5 X 35mm, and special stepped bolts - 1990-2005
OW525
Flange Type Puller Combination Set
Two specialty pullers in one box. Flange type puller - for removal of harmonic balancers, timing gears and other parts with two or three tapped holes. Also includes a steering wheel pulley and flywheel puller. Comes with four sets of cap screws.
OW4532
Large General Purpose Puller Set
Large jaws cover wide range of pulling jobs. 7 ton pull capacity with 7-1/4” to 9-5/8” spread and 5-1/2” to 9-1/2” reach. Two forcing screws with live centers.
 Includes:
QTY. PART #
1 HR187100
1 HR187200A
1 HR189300
2 HR187500
2 HR187600
2 HR187700
2 HR189700
2 HR189800
OW7984
Master Steering
Wheel Puller Set
DESCRIPTION
Cross Arm Only Replacement Screw with swivel Swivel & O-ring 5/16”-18 x 4-1/2” Side Screw 5/16”-24 x 3-1/2” Side Screw 1/4”-28 x 3” Side Screw 3/8”-16 x 4” Side Screw
M8 x 1.25 x 80mm Side Screw
                    Includes: Flange, collar,
set screw, steering
wheel puller legs,
steering wheel lock
plate remover kit,
washer head bolts 1/4”-
28 UNF x 3”, hex head
flange bolts 3/8-16 UNC
x 3.5”, hex head flange
bolts 5/16-24 UNF x 3.5”,
hex head flange bolts
M8 x 1.25 x 90mm, flange
head cap screw 5/16-18 UNC, power thread lube, and storage case
OW522
Long Gear and Pulley Puller
Removes a wide range of gears,
pulleys, or other parts that
have tapped holes. The puller
will spread from 2” to 7-3/4”.
Block is 8-1/4” wide, and forcing
screw is 3/4”-16 x 11-5/8” long.
Accommodates any cap screws up to 1/2” diameter.
  Use each tool properly. See page 688 for safety warnings.
www.cornwelltools.com 535
  UNDERCARRIAGE & WHEEL































   535   536   537   538   539