Page 528 - Cornwell Product Catalog
P. 528

Bushing Driver Set
Remove and install bushings ranging from 3/8” to 1-3/8” in diameter. Includes 3 driver handles and 16 bushing adapters. Comes in a blow- molded case.
HR504000 HR504100 HR504200 HR504310 HR504330 HR504350 HR504370 HR504390 HR504410 HR504430 HR504450
HR504470 HR504490 HR504510 HR504530 HR504550 HR504570 HR504590 HR504610 HR504900
Flywheel Holder and Socket for 6.6L Duramax Engines
Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions. Saves time
Stops loss of transmission fluid.
Set of five stepped plugs fit both
transmissions and transaxles on mo
import and domestic cars and pickups. Stepped design prevents slipping. Adapter LS23450 includes side gear centering for Ford Transaxles. Plugs cover a range of 1” to 2.180” (25.4mm to 55.37mm).
Small Shaft Driver
Large Shaft Driver Medium Shaft Driver 3/8”-7/16” Bushing 7/16”-1/2” Bushing 1/2”-9/16” Bushing 9/16”-5/8” Bushing 39/64”-11/16” Bushing 5/8”-3/4” Bushing 11/16”-13/16” Bushing 47/64” -7/8” Bushing 13/16”-15/16” Bushing 55/64”-1” Bushing 15/16”-1-1/16” Bushing 1”-1-1/8” Bushing 1-1/16”-1-3/16” Bushing 1-1/8”-1-1/4” Bushing 1-3/16”-1-5/16” Bushing 1-1/4”-1-3/8” Bushing Case
LS23410 1
LS23420 2
LS23430 3
LS23440 4
LS23450 5
Lock Ring Pliers
1”-1.250” (25.4mm to 31.75mm) 1.300”-1.550” (33.02mm to 39.37mm) 1.600”-1.850” (40.64mm to 46.99mm) 1.925”-2.180” (48.895mm to 55.37mm) For Ford Transaxles
                                                           by locking the flywheel at
the transmission instead of
having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate
on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36MM 12-point socket with 3/4” square drive to remove harmonic balancer bolt and retorque on installation.
For use on external,
lightweight rings without
pick-up holes. Jaws are scored on outside face and angled at 90°. For GM and Ford output shafts and intermediate carriers and other uses. Comfort cushion-grip handles with spring-return for ease of operation. Heat treated. Black oxide finish.
Retaining Ring Pliers
For use on automobile transmission rings. 9-1/2” long with vinyl grips.
ARCRY933 Chrysler/Dodge/ Jeep Transmission Dipstick
Used on all vehicles equipped with a NAG1,
42RLE, CVT transmission
and the 62TE transaxle. Chrysler, Dodge and Jeep Applications. Charts included.
526 1-800-321-8356

   526   527   528   529   530