Page 510 - Cornwell Product Catalog

RADIATOR TOOLS
Hose Clamp Vise
Used to relieve clamp spring pressure in very
tight spots. Vise is often left in place, with the
clamp compressed, during service. Ramp on
jaws guides tab of clamp into correct position
and traps it in the slot for safety. Tighten knurled knob by hand or use 1/4" drive ratchet. Compact design works great in confined spaces. The small size works especially well on heater hose clamps.
LS44480 | Large, opens to 2-1/8" LS44500 | Small, opens to 1-1/2"
LS39190
Heater Hose Disconnect GM 3/4”
Designed to separate quick-connect fittings on
3/4” heater lines on GM vehicles. Hinged design
allows the tool to slip over the heater hose, even
in tight spaces. Slide the tool into the connector to
release the line. Aluminum provides strength and durability.
LS39200
Heater Hose Disconnect for Ford 2.0L
Disconnects the heater hose fittings on 2012-2016
Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L EcoBoost®. These type of fittings are close to the
firewall behind the engine and are difficult to turn
with very little to hang onto to rotate. They only get
worse over time with each heat cycle and deposit buildup.
OW6046
GM Heater Line Disconnect Tool
Specifically designed for separating quick-connect
fittings on heater lines of 1999-2004 Chevy and
GMC C/K trucks. Tool snaps around the hose and
simultaneously depresses the locking tabs to disengage the fitting. Application: C/K truck: the 0.75 inch (3/4”) heater lines coming from the I.P. have quick connect style fittings; the access is very limited and the connectors have four tangs to depress at the same time; slide disconnect tool over the heater line, clamp tool over line, and then press tool into the connector to release.
TH423
Universal Radiator Petcock Socket
Fits petcocks used in radiators, engine blocks, liquid storage tanks, etc. Use 1/4" drive ratchet or 7/8" wrench. O-ring on socket helps hold wrench
in places, allows one hand operation for use in confined areas. Two slot design allows for use on all types and prevents damage to ears on petcock.
LS34900
OEM Water Sensor Wrench
Removes and installs the water
sensor located on the fuel filter on
2012 and newer 6.6L Duramax Diesel
Engines. For use when replacing the
fuel filter or when servicing the water sensor. The plastic sensor has a new hex design that is easily damaged by tools (like pliers) that do not specifically fit the sensor.
LS34910
Water Sensor Wrench
Removes and installs the
aftermarket water sensor located on
the fuel filter on 2001 through 2011
6.6L Duramax Diesel Engines. For use when replacing the fuel filter or when servicing the water sensor. The aftermarket plastic sensor has a modified octagon shape that is easily damaged by tools (like pliers) that do not specifically fit the sensor.
CRHRG1000
Radiator Genie
Radiator blow out/wash out kit. Air wand for blowing out debris. Water wand for washing out debris. Infinite adjustable pressure. Specially designed fan head to increase working width. Special sized tube for access to close, confined areas. Special sized opening to increase pressure. Special sized bend on fan head to go in through cowl and between fan blades and blow directly through radiator fins. Air adapter is standard Milton industrial size. Rust proof. Overall wand length: 22.5". Nozzle length: 17". Maximum PSI: 135
CRHRGIX5001CS
Industrial Power Cleaning Wand
Extra-long 42" nozzle. Use with air or water. All metal body with interchangeable air fitting. Precision power cleaning for equipment, filters and just about anything that is dirty. Patented fan head increases pressure and working width for maximum cleaning. Special sized tube to access confined areas. Durable nylon handle stays cool to the touch. Overall length: 49"
508 1-800-321-8356
A/C & COOLING