Page 481 - Cornwell Product Catalog
P. 481

Harmonic Balancer Tools // ENGINE TOOLS
Master Harmonic
Balancer Puller Kit
Removes most automotive harmonic balancers. Includes: standard harmonic balancer puller, pulling screws, adapters (for
3300 and 3800 GM V6 engines), harmonic damper pulley puller (for Chrysler, GM, Mitsubishi, & Dodge) and interchangeable puller jaws (for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi)
Harmonic Damper Pulley Puller
For Chrysler, GM, Mitsubishi
and Dodge. Low profile
design works in confined
spaces eliminating the
need to remove the radiator.
Equipped with magnetic jaw
spacers for 5.9L Dodge. Jaw
geometry, slim magnetic
spacers and a four rods allow use on 4.2L Trailblazer, Envoy and Bravada ‘03 and newer, 4.2L Buick Rainier ‘04 and newer, 3.5L Colorado and Canyon ‘04 and newer, Hummer H3 ‘06 and newer, 2.8L Colorado and Canyon ‘05 and newer. Jaws are held in place with a clevis pin and can be removed and replaced easily.
Master Harmonic Balancer Kit
Long reach balancer / pulley installer set. Use to install crank pulley or underdrive pulley on many late model Ford, GM, Dodge and Chrysler vehicles with V6 and V8 engines, with or without recessed threads. Traditional smaller installer kits will not work in many of these applications.
Long Reach Balancer/Puller Installer
Extra long reach tool kit for
installing underdrive/oversized
pulleys and for applications
with recessed threads on the
crankshaft. Installs harmonic
balancer pulleys on many
popular late model Ford, GM,
Dodge and Chrysler vehicles
with V6 and V8 engines with
recessed threads for the crank pulley bolt or utilize an underdrive pulley or both. Traditional type balancer pulley installers will not work in many of these applications. Features four high quality, long- reach threaded adapters and a universal nut. Works on: 2004-2012 Ford 3.0L, 3.5L, 4.6L, 5.4L, 6.8L; 2008-2012 GM 4.8L, 5.3L, 5.7L, 6.0L, 7.0L; and 2006-2012 Dodge/Chrysler 3.7L, 4.7L, 5.7L, 6.1L.
1 LS45230
3 LS45310
1 LS45320
3 LS45540
2 LS45590
3 LS45600
3 LS45610
3 LS45620
3 LS45640
1 LS46530
1 LS46550
1 LS49550
1 LS49560
1 LS49590
1 LS49630
1 LS51460
3 LS51670
1 LS51680
1 LS54790
1 LS54860
1 LS54870
12 LS54890
Shoulder Bolt
M8 x 1.25 x 75 Bolt
3/8” - 16 x 3” Bolt
5/16” - 18 x 3” Bolt
M10 x 1.5 x 75 Bolt
3/8” - 24 x 3” Bolt
Puller Screw
5-3/8” Rod
4” Rod
Drive Screw
7-3/8” Rod
Harmonic Balancer S/A
Magnetic Jaw Spacers
6-1/2” Rod
Harmonic Balancer Puller Jaw Set, Camaro Harmonic Balancer Puller Jaw Set, Dodge Hemi Crescent Shaped Washer
Harmonic Balancer Installer Kit
Installs harmonic balancers or
drive pulleys that are pressed on
the crankshaft. Set includes driving
screw, thrust bearing and 12 threaded
adapters necessary to work on a
wide range of domestic and some
import harmonic balancers. Four long
adapters for use on Dodge Hemi, Generation III and IV GM motors, some Ford and some Chrysler. The 1.75” spacer allows the tool to work more effectively on deep harmonic balancers.
Use each tool properly. See page 688 for safety warnings. 479

   479   480   481   482   483