Page 437 - Cornwell Product Catalog

WIRE SERVICE
ECB790C
Hammer Indent Crimping Tool
Place end wire in crimping area; release crimping pin, then use hammer or vise on crimping pin. Spring loaded pin. Compact and lightweight. 8 gauge to 4/0 AWG. Made from cast steel. Weight: 2 lbs.
ECB7946
Portable Wire Crimping Tool
Does a 3-point crimp all at one time and crimps up
to 4 AWG cables. Small, hand held crimper for tight
work areas. Can be held with a 3/8” extension or
ratchet, as well as a 19mm or 3/4” open end wrench.
Ratchet the movable crimping head down onto the
12-point base to make a 3-point crimp. Can be used
with a 3/8” impact battery drill for heavy duty wire
up to 4 gauge. Can be held in a vise for bench work.
Adjustable wrench holding slot on back of tool. Convenient 3/8” drive holding fixtures on top and bottom. Portable, durable and compact. No need for a hammer. Great for installing stereos. Hardened fine thread drive screw for precise crimps.
ML15E
Locking Stripper/Cutter
Precision-ground
stripping stations.
Serrated pliers nose for pulling and working wire. Scissors-action cutter. Holes in jaw for looping wire. Return spring. Lock to protect stripping stations. Stripper Sizes (AWG)-10-20 Stranded and .8-2.6 mm. Made from heat treated tool steel. Conforms to ASME Standard B107.500-2010. Made in U.S.A
ML22E
Crimper/Cutter with 6 Strip Stations
Crimper/Cutter 6 Strip
Stations NSN 5120-00-
278-2423. Insulated and
non-insulated crimp
stations. Screw sizing
and cutting stations.
Anvil-type cutter. Precision-ground stripping stations. Highly visible, easy-to-read graphics. Cushion grips. Stripper Size (AWG) 10-22. Screw Cutter 4-40/6-32/8-32/10-32/10-24. Made from heat treated tool steel. Conforms to ASME Standard B107.500-2010. Made in U.S.A
ML23E
Ignition Crimpin
Crimps 7 & 8mm
ignition terminals,
high tower right angle
ignition terminals, “W”
or “F” crimp distributor terminals, right angle spark plug terminals. Crimps all solderless terminals, butted seam, brazed seam, PVC and nylon. Extra broad blade for cutting all types of ignition and primary wire. Strips 7 & 8mm ignition and #10 through 18 gauge primary wire. Cushion grip handles. Length: 9-1/2”
ML2E
Wire Stripper, Cutter and Crimper
AWG and Metric, full
1/2” scissor type cutting
blades. Stripping
stations for 22 to 10 and
.5mm to 5.3mm. Perfect
rethread and bolt cutting on 6/32, 8/32, 10/32 plus 3.5mm, 4mm, and 5mm. Crimping of both insulated and non-insulated terminals; also 7-8mm auto ignition. Air cushion vinyl grips. Length: 9-1/2”
ML3300
Specialty Heavy-Duty Stripper/Crimper
Crimps insulated
and non-insulated
terminals. 2 precision
ground wire cutters.
Precision ground
scissors-type wire stripper for 22-8 solid wire and 26-10 stranded wire. Cuts and rethreads 5 common sizes of bolts. Crimps 7-8mm spark plug wire terminals, Insulated (AWG) 10-26 , Non-Insulate (AWG) 10-22, 7-8 mm Auto. Screw Cutter 4-40 /6-32 / 8-32 / 10-32 / 10-24. Made from heat treated tool steel. Made in U.S.A.
ML46E
5 in 1 Combination Tool
Strips:
22/20/18/16/14/12/10
AWG. Low profile pivot
hardware. Wire looping
hole. Longer cutter
handles heavier wire. Curved cutter for improved cutting action- requires less force. Crimps insulated and non-insulated: 22-18, 16-10 AWG; non-insulated: Auto 7 & 8 mm. Screw cutter: 4-40 / 5-40 / 6-32 / 8-32 / 10-32 / 10-24. Wire sizes, etc., are embossed in metal and paint- filled. Serrated pliers’ nose for pulling and looping wire. Air-pocket cushion grips. Made from heat-treated tool steel. Conforms to ASME Standard B107.500-2010. Made in U.S.A.
Use each tool properly. See page 688 for safety warnings.
www.cornwelltools.com 435
g Tool
DIAGNOSTICS & BATTERY SERVICE