Page 267 - Cornwell Product Catalog
P. 267

Calipers // MEASUREMENT TOOLS
   CEC3C301
Electronic Digital Caliper - Large Scale
0-6” / 0-150mm. Easy to read digital display reduces errors. Thumb wheel for precise control. Hardened stainless steel frame. Inch / metric conversion at the push of a button. Comes in plastic case with extra battery.
CE3C351 Carbon Fiber Digital Caliper
Composite material for
superior reliability and durability. Digital display with decimal inch, decimal metric and fractional readout. Push button conversion. Range: 6”/150mm with .0005”; .01mm; 1/64” resolution. Four measurements: inside, outside, depth and step. Large LCD panel for easier reading. Two (2) LR44 1.50V batteries included.
FW741011502
Electronic Caliper
Accuracy: ±.001/.02mm.
Range: 6”/150mm.
Resolution: .0005"/.01mm. Direct inch/metric conversion. 4-way measurement - inside, outside, depth and step. Stainless steel frame. Large, easy to read display. Includes molded case.
FW741020060 AutoCal Electronic Caliper
Inch/metric/fraction
reading: .0005”/.01mm/ 1/128”. Dust, water and oil resistant to IP54 standards making it great for garage and shop environments. Heavy- duty frame for extra rigidity and wear. Direct inch/metric/fraction conversion. Floating zero. Super large, easy to read 14 x 52mm display. 4-way measuring Combined thumbrest and thumbroll for fine adjustment. Includes spare battery and fitted case.
CEC3M430A Electronic Digital Rotor Gage
Hardened and tempered
stainless steel gage. Large
figures in LCD display for
ease of reading. Metric or Imperial read-out. Zero setting control allows for comparative measurement. Supplied in carrying case.
FW74101777 Drum and Rotor Measuring Kit
Measures disc
brakes and up
to 12” on brake
drums. Includes
a set of clamps, four sets of set screws, one Allen wrench, a set of 3-3/4” contact points, a set of 3/4” cone contact points and a set of 3/4” flat contact points in a plastic tube. When measuring brake drums only, add 8” to measurement - allows for long cone and jaw widths. For use with 6” and 8” calipers. Range: 6”. Stainless steel frame, large easy to read display, .0005” resolution, direct inch/ metric conversion, 4-way measurement. Includes molded case.
FW74150004
Rotocal Electronic
Rotor Gage with
Twin Conical
Anvils
Range: 5.5”/140mm. Reads in inch, metric, and fractions. Conical anvils measure scored surfaces. 3.5” jaw depth for larger rotors.
FW74150005
Rotocal® Reach Electronic Rotor Gage
Measure most rotors while the wheels are still mounted on the vehicle. Inch/metric/fraction. Range: 0-3.25"/0-82.5mm. Resolution: .0005"/.01mm (fractions in 1/64" increments). Twin conical anvils with the ability to measure low points on both sides of the rotor. Includes molded case.
      Caliper Gage
Features inch/metric/fraction reading. Robust housing. Large LCD display. Reading: .01”/.1mm/1/64ths. Accuracy: .01”/.3mm/1/64ths. Battery: CR2032 (included). Spring loaded with locking nut.
   PART #
DESCRIPTION
RANGE
Use each tool properly. See page 688 for safety warnings.
www.cornwelltools.com 265
FW74554630
FW74554730
Outside Caliper Gage
0-6"/150mm
0.5-6"/15mm
 Inside Caliper Gage
   HAND TOOLS


















































   265   266   267   268   269