Page 17 - October 2020 Promotional Flyer
P. 17

EGT Sensor Socket Set
Harmonic Damper Pulley Puller
$99.95 $131.95 LS51450
For Chrysler, GM, Mitsubishi and Dodge. Low profile design works in confined spaces eliminating the need to remove the radiator.
Serpentine Belt Tool
$124.95 $179.95
Designed to remove
exhaust temperature
sensors. Drives all 6
sides of the hex equally
to reduce the chance of
damage. The 3 different
sizes and two different
styles will remove most if
not all EGT sensors used
on cars, light, medium,
and heavy-duty trucks on the road today.
Compression Tester
   $59.95 $79.95
Quality compression
tester that features a
rubber coated, steel
reinforced hose for
extra strength. Good
for 10mm, 12mm,
14mm, 14mm long,
16mm and 18mm
spark plug holes. Large
2-1/2” diameter gauge has 0-300 lb. range in both PSI and metric readings. Side release valve allows for rechecks without removing the tool. Includes 12/16mm Ford Triton Adapter.
Seals to cooling systems with included molded cones - no adapters required. Fits 99% of cars and light trucks in the market. Use with shop air (80+ PSI) to create a
$74.95 $91.95
with 13mm
- 16mm,
18mm hex or 3/8” and 1/2” square drives. For hard
to access tensioners; there are 13mm and 15mm 12-point wrenches built into the handle. 13mm, 14mm and 15mm crowfoot wrenches also included.
Variable Pin Spanner Wrench Set
$189.95 $219.95
Vacuum Assist Coolant Refiller,
    Master Diesel Compression Set -
Use with shop air
(80+ PSI) to create
a vacuum and refill
a drained cooling
system in less than
five minutes. Helps
prevent "airlocks".
Compatible with
most cooling system adapters. Powerful 2.4 CFM vacuum generator and large fluid passageways give the refiller a fluid flow rate of 2.4 gallons per minute. Includes hard storage case.
Combustion Gas Leak Tester Kit
Light Duty
$349.95 $399.95
Set includes 12
different adapters
for checking
compression on
numerous diesel
engines found in
light and medium
duty trucks and cars. Easy-to-read 2-1/4” dual scale dial with pressure release valve and protective boot. 16-1/2” wire reinforced hydraulic hose with swivel-end quick coupler. Coverage includes various Caterpillar, Cummins, Ford, GM, Hino, Hummer, Isuzu, Jeep, Kawasaki, Kubota, Land Rover, Mazda, Mercedes, Mitsubishi, Navistar/International, Nissan, Perkins, Sprinter, Toyota, Volvo, VW and Westerbeke engines.
Exhaust Back Pressure Test Kit
$59.95 $69.95 HMTU29CW 2.5” Multi-colored gauge
with protective boot. Dual bands test at idle and 2,500 RPM (-7 to 15 PSI). O2 Sensor adapter includes M12 & M18 thread. 6 ft. hose provides versatility and road test capability.
Seal Tool Kit
$134.95 $159.95
$59.95 $72.47
Fits on a
wide variety
of pulleys
that feature
holes or
slots, including both crankshaft and camshaft pulleys. Adjustable from 1-1/4” up to 5”. Use with a 1/2” drive ratchet or breaker bar.
Vacuum Assist Coolant Refiller
vacuum and refill a drained cooling system
in less than five minutes. Powerful 2.4 CFM vacuum generator and large fluid passageways. Includes hard storage case.
FITS 99%
$189.95 $219.95
    NOTE: All items shown in this flyer are limited in quantities and subject to availability. Please also note that the printed color may differ from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
OCTOBER 2020 17
Easily remove and install
crankshaft and camshaft
seals without damage.
Compact puller with unique
extracting hooks engage
seal for quick removal.
Interchangeable sleeves
and mandrels allow easy
installation of new seal. Provides coverage for light commercial and heavy duty vehicles that utilize crankshaft and camshaft seals from 21.5mm - 64mm.
Coolant Barrier/Pressure Tester
$69.95 $79.95
$229.95 $259.95
Allows the technician to change a cooling system component without draining
the cooling system.
Openings as large as 21MM diameter will result in little or no leakage. Can also pressure test the cooling system for leaks. Comes with dual gauge (pressure/ vacuum), hook assembly, air inlet valve, 8 foot exhaust hose and plastic carrying case.
Test for combustion leaks from head gaskets, cylinder heads, and engine blocks in both gasoline and diesel engines. Dual-chamber design for higher accuracy
to eliminate false
readings. First
chamber will filter out
any alkaline particles
that could result in a
false indication of a combustion leak; second chamber provides true indication of a combustion leak. Kit includes: dual chamber tester, 16 oz. tester fluid, operating instructions and storage case
   15   16   17   18   19