Page 21 - February 2020 Monthly Promotinal Flyer
P. 21

Toyota Front Hub Nut Socket
$69.95 $78.95 HR977 Designed to fit Toyota front hub lock
nuts on 2007 and up 2WD 4Runner
and Tundra (2008-2014 Sequoia)
model. Allows easy removal and installation on front hub locknut without damage to the nut. 8-Pin design, with 3/4” female drive. Comparable to Toyota factory tool #09318-12010-8Pin and 09602-60010.
Heavy Duty U-Joint Puller
$239.95 $269.95 HR199 A heavy-duty solution for
disassembling even the most
seized stubborn U-joints in
minutes on virtually all Class
7 and 8 trucks and machinery.
Engineered for use with up to a
1” impact tool. Does not damage
the driveshaft, yokes, joints or
bearing cups. Applications include: U-Joints with bearing cups 1.5” to 2.2” O.D.
Vacuum Brake Bleeder
$115.95 $131.49 Uses compressed
       shop air between
60 and 150 PSI, to
create a powerful
vacuum for bleeding
brakes or hydraulic
clutches. Convenient
for any shop, this
rugged tool turns
brake bleeding into a
clean, quick, one-man job. Compact 1.3 quart (1.2 liter) capacity reservoir. Comfortable lever-action throttle with lock-on latch. 4 ft. long bleed hose with molded support. Universal bleed screw adapter conforms to most common bleed screw sizes. Integrated muffler ensures quiet operation. Includes two replacement bleed screw adapters.
  Vacuum/Pressure Pump Kit
$99.95 $111.98 NEMV8500
Pump produces vacuum along with pressure for a variety of vehicle service applications. Performs engine
diagnostics, brake bleeding, fluid transfer, evacuation, sampling, windshield repair and more.
   Bearing Race and Seal Driver Master Set
$89.95 $104.45 LS12980
Insert wheel bearing race and seals without damage to race and axle housing. Includes handle and nine driver sizes (Range: 1.565” to 3.180”) to fit most standard wheel bearings in a plastic blow-molded case.
     Hydraulic In-Line Flare Tool
$169.95 $199.95
  Combines features
of In-Line Flaring
Tool and a Hydraulic
Flare Tool to make a
lightweight, low profile,
affordable tool. Fits
into tight access areas
allowing on car use.
Does single, double
and bubble flares with
the option to expand
into quick connect
fittings. SAE: 3/16”, 1/4”, 5/16”, 3/8”. Metric: 4.75MM, 6MM, 8MM.
 Multipurpose Bearing & Pulley
Puller Set
$189.95 $214.95
Set includes drop- forged components, which can be used
in a variety of combinations. Spread: 3” to 5”, Reach: 1” to 2-1/4”
   Pinion Bearing Race Driver Set
$159.95 $203.45 LS59400
Set includes 8 drivers for driving inner and outer pinion bearing races on 1/2 and 3/4 ton Ford, Dodge and GM pickups. Use the extended, two- piece handle for driving rear pinion bearing races. A pneumatic handle is also included for use with an air hammer.
    Exhaust Remover Pliers
$24.95 $29.98 LS38350
Separates exhaust
hanger brackets from
rubber supports.
Works on all import
and domestic car and
truck exhaust systems that use the rubber hanger supports. Simply squeeze the pliers handles to force the bracket from the rubber support.
     Blind Hole Bearing Puller Set
$179.95 $209.95 HR29
Designed for removing
recessed bearings. Set
includes a 2-1/2” lb. slide
hammer with T-Handle
and four collets, for a wide
range of applications.
Ideal for removing pilot
bearings. Collet sizes: 3/8” to 1/2” (10MM - 14MM), 9/16” to 11/16” (15MM - 19MM), 5/8” to 1” (18MM - 25MM), and 1” to 1-1/4” (25MM - 32MM).
Bearing Separator/5 Ton Bar Type Push Puller Set
$109.95 $123.62 HRC4518
Includes 2 popular bearing splitters (2” and 3”), 4 sets
of hex push-puller legs and
a bar-type puller head with a 9/16” diameter forcing screw. 5” puller cross-bar with a 6-1/4” forcing screw or each
of the bearing separators
may be used separately or in combination with other pullers.
     8 Piece Front Wheel Drive Axle Nut Socket Set
$99.95 $129.95
  Features extra-long chrome molybdenum 1/2” drive sockets.
Use for heavy-duty applications in
removing or installing axle nuts on a wide variety of domestic
and import vehicles.
Can be used with
torque wrenches,
ratchets and breaker bars.
  Drill Template for Ford Exhaust
$119.95 $142.95 LS68500
Designed to remove broken exhaust manifold studs on 4.6L, 5.4L 2 valve, 5.4L 3 valve and 6.8L V10 Ford engines without damaging the block. Interchangeable plates ensure drill is centered on the broken stud. A depth gauge for drilling is marked on the template. The screw extractor is then used to remove the broken stud.
   Wheel Stud Installer
$29.95 $36.80 LS22800
Use with a ratchet or impact wrench to pull the new stud securely in place.
    NOTE: All items shown in this flyer are limited in quantities and subject to availability. Please also note that the printed color may differ from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
FEBRUARY 2020 21
   19   20   21   22   23