Page 20 - February 2020 Monthly Promotinal Flyer
P. 20

   Cooling System Tester Kit
$169.95 $189.95 MSM100K
 Test cooling systems and caps up to 30PSI. Head includes a pressure release handle that when turned clockwise, releases pressure build-up before removing the head from the cooling system. Gauge equipped with internal shock dampener. Pump includes the three most commonly required cooling system adapters plus an adapter application guide, all packaged in a durable molded plastic case.
  C-Frame Socket Press
$324.95 HR201
Includes a rigid 2-1/2 ton capacity C-frame and eight impact rated adapters for a wide range of removal and installation applications. Designed for the removal and installation of driveline and non-driveline components. For use on cars, light-duty trucks, ATV, UTV, and farm machinery. Includes a heavy-duty storage case.
Cooling System Adapter Set
$299.95 $339.95 MSM14000P
Designed as an add-
on for the MSM100K
Cooling System Tester
Kit. Carrying case comes
with 14 composite cooling
system adapters. When
added to the MSM100K
with its pump and three
adapters, the combination
will pressure test the
cooling systems of all
modern cars and light trucks through 2006.
 Ball Joint Super Set
$319.95 $362.25
  This set allows for
the removal and
installation of press-fit
ball joints on many
light-duty trucks, vans
and SUVs. C-frame
tool can be used alone
to remove and replace
universal joints. Comes complete in a durable case.
 ATF Refill System
$354.95 $399.50 NEMV6410
Dispenses fluid to top-off or re-fill sealed automatic transmissions. Includes 10 adapters to connect
to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes, and Volvo transmissions. Large 1.2 gallon fluid capacity. Fluid is dispensed under pressure for smooth continual flow.
  Ball Joint Service Tool Set
$179.95 $204.95
Works on most common press-fit ball joints. C-frame press can be used alone to remove and replace universal joints.
  Large Truck Cooling System
$299.95 $380.95
 Use to
fill large
found in
air pockets during cooling system refilling. Attaches to cooling system adapters and uses shop air to create
a vacuum in the cooling system. Large diameter, high- capacity hoses and passageways for a faster, more complete fill. Includes one standard cooling system adapter.
  Slip Joint Oil Filter Pliers
$34.95 $40.10
Two-position slip-joint handle
for greater range. Overall range: 2-1/4” to 4”. Jaws are bent at a 20° angle to fit more applications.
     Pickle Fork Kit
$56.95 $67.05 LS41500
For separating ball joints, tie
rods, Pitman arms and other
uses. Kit consists of three forks and two handles; one for hammering, the other for use with an air hammer (.401” shank).
   Truck Ball Joint Master Kit
$995.95 $1,225.95 OW6539
This 55+ piece kit covers press-in ball joints on
the following Truck/Van/SUV applications: Toyota, Hyundai, Kia, Infiniti, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, Buick, Oldsmobile, Pontiac, Cadillac, GMC and Hummer.
  GM Torsion Bar Tool
$99.95 $115.00 HR200
For relieving tension from the torsion bar arm to remove the torsion bar. Utilizes a larger C-frame design to increase
the application range for more vehicles. Includes
an adapter for non-GM applications. Heavy-duty construction. Applications: 1988 and up GMC and Chevrolet 1/2 ton, 3/4 ton and 1-ton trucks. 2011
and up GM HD trucks, S-10 Blazers, S-15 Jimmys
and 4WD trucks with 4.3L engines. GM K-3500 series with HD chassis, including GM 5-lug, 6-lug and 8-lug vehicles. Includes an adapter for using tool on non-GM applications.
    PowerProbe® Temperature Kit
$34.95 $39.95 PWTEMPKIT
A dual-zone digital thermometer
with a wireless remote
temperature sensor. The remote
temp sensor can transmit
temperature readings up to 195’
(60M) away from the base unit.
Users can monitor temperature
differences (ambient versus AC
outlet, inside versus outside
temps and more). Operating
range and measuring range is
-4o F to 158o F (-20o C to 70o C).
It requires a pair of both AA and AAA batteries, with a battery life of 400 hours.
NOTE: All items shown in this flyer are limited in quantities and subject to availability. Please also note that the printed color may differ from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.

   18   19   20   21   22