Page 208 - Cornwell Product Catalog

PLIERS
// Individuals
KXC580
6" Compact Bolt
Cutter
Compact and powerful at
6-1/4" - cuts nails, small bolts, rivets up to 11/64" diameter. Lasered cutting edge prevents slipping of material being cut. Gripping surface below the joint for gripping and pulling wires with a diameter from 3/64". Cutting capacity - up to 13/64" for soft wire, up to 11/64" for medium, up to 1/8" for hard and up to 1/8" for piano wire. Small, slim head for better access to confined areas. Strongest cutters of their length due to lever action design.
KXC630
10" Bolt Cutter
with Notch
Black atramentised pliers. Plastic-coated handles with recess for easier cutting of thicker wires. Longer handles for more powerful cutting.
KXC600
8” Lever Action Cutter
Small 8” hand held bolt cutter; lever action provides easy cutting
of hardened materials. Cutting performance is 20x higher than the applied hand force because of the special lever action design. Center cutting design produces easier cutting action. Cutting edges are induction hardened separately (64 HRC) for longer tool life. Designed for effortless cutting of hardened materials; solid or stranded wire. Maximum cutting capacities: 13/64” Medium/Hard; 5/32” Hard.
KXC625
8” Angled Head Lever Action Cutter
Exceptional cutting performance with minimal effort due to effective lever action design that guarantees a favorable lever ratio with low friction. 20° angled head and joint construction allows almost flush cutting. Easily cuts bolts, nails and rivets up to 5.2mm diameter. Precision cutting edges for soft, hard, and piano wire. The handles, which run at an angle to the cutting blades, offer ample space for gripping. Slim dual component handles with wide contact surface at the end of the handle for better distribution
of pressure. Integrated opening spring with comfortable locking device. Locks with a spring clip for secure transport. Cutting edges induction hardened at approximately 64 HRC. Black atramentized high performance chrome vanadium steel, forged, oil-hardened and tempered. Plastic coated handles.
KXC500
8” Long Nose Pliers with Cutter
For holding, gripping and bending; for use in confined spaces and precision applications. Serrated gripping surfaces provide a precise, secure grip. Special steel construction allows jaws to maintain shape under heavy load conditions. Integrated cutter with induction- hardened edges permits easy cutting of soft to medium-hard wire. Coated handles for a more secure and comfortable grip.
KXC550
8” Long Nose Bent Pliers with Cutter
For holding, gripping and bending, especially when the application demands an offset or angled approach; for use in confined spaces and precision applications. 40° angled jaws allow easy access in offset applications. Serrated gripping surfaces provide a precise, secure grip. Special steel construction allows jaws to maintain shape under heavy load conditions. Integrated cutter with induction-hardened edges permits easy cutting of soft to medium-hard wire. Coated handles for a more secure and comfortable grip.
CCL317
8" Long Nose Pliers with Cutter
Perfectly mated cutters,
heat-treated to hold edges. Cross hatching on jaws. Polished high carbon drop forged steel. Length: 8” (203.20mm)
CCL318
8.375" Long Nose Pliers with Cutter
Perfectly mated cutters,
heat-treated to hold edges. Cross hatching on jaws. Polished high carbon drop forged steel. Heavy-duty. Length: 8-3/8” (212.25mm)
CCL748
8” Long Reach End Cutter Pliers
Precision matched jaws.
Perfectly mated cutter, heat-treated to hold its edge. Designed for use in confined areas. Electronic coating to prevent rusting. Polished high carbon drop forged steel. Neon orange comfort grip. Length: 8” (203.20mm) end cutter.
206 1-800-321-8356
HAND TOOLS